Express + expert help

View pricing →
Skip to main content
guideCEMark, RED, MarketSurveillance5 min read

CE Marking Responsibilities for Private Label Electronics

Map private label manufacturer responsibilities, OEM evidence access and change control before placing electronics on the EU market.

By CenitiaUpdated

Selling an OEM device under your own brand can make you the manufacturer for the applicable product legislation. A supply contract can assign practical tasks, but it cannot simply label the OEM as responsible and remove your public law obligations.

The private label OEM responsibility record helps a private label electronics business establish evidence access, release authority and change control before placing the product on the market.

Determine the role from the actual arrangement

For radio equipment, start with two provisions of the Radio Equipment Directive 2014/53/EU (RED). Article 2(1)(12) defines the manufacturer as a person who manufactures radio equipment or has it designed or manufactured and markets it under his name or trade mark. Article 14 covers importers and distributors:

"An importer or distributor shall be considered a manufacturer for the purposes of this Directive and he shall be subject to the obligations of the manufacturer under Article 10, where he places radio equipment on the market under his name or trade mark or modifies radio equipment already placed on the market in such a way that compliance with this Directive may be affected."

Read both with the manufacturer duties in Article 10 of the RED. Article 13 of the RED, which sets out distributor obligations, applies only as long as you sell the product under the original manufacturer's name and do not modify it.

Other applicable legislation needs its own role assessment. Do not assume a RED conclusion automatically answers RoHS, WEEE or every national registration question. The Cyber Resilience Act has a parallel rule in Article 21 of Regulation (EU) 2024/2847, which applies from 11 December 2027. Document the entity, brand, manufacturing location, importer arrangement and route to market.

An authorised representative is a separate role defined by a mandate and applicable law. A consultant collecting documents is not automatically that representative. The factory, private label business, importer and marketplace can each have distinct duties. The roles are compared in EC REP vs importer responsibilities.

Build the responsibility matrix around deliverables

Deliverable or eventWhat to agree with the OEM
Product specificationExact models, revisions, approved variants and intended use
Technical documentationAccess rights, covered content, retrieval time and confidentiality arrangements
Test evidenceProduct mapping, complete reports, rights to rely on them and unresolved scope
Declaration and markingResponsible entity, approved text and controlled release
Production changesPrior notification, assessment owner and approval before substitution
Vulnerability or safety issueNotification channel, response owner and access to engineering evidence
Supply relationship endsContinued records access, support capability and update arrangements

The matrix is a commercial and engineering planning tool, and the worksheet is where you record the outcome for each deliverable. Have a lawyer review enforceability and statutory responsibility. A signed matrix is not a conformity assessment.

Ask for access that works under pressure

An OEM may reasonably protect proprietary design information. Resolve that through workable access arrangements rather than accepting “confidential” as an answer to every evidence request. Identify which documents you hold, which are available through a controlled channel and how competent authorities can obtain the necessary material.

For radio equipment the period to plan for is fixed: Article 10(4) of the RED requires manufacturers to keep the technical documentation and the EU declaration of conformity for 10 years after the radio equipment has been placed on the market.

Test the retrieval process before launch. If a report exists only in a former employee's mailbox, the contract's promise to provide it may be of little operational value. Keep an index with document IDs, revisions, owners and retrieval instructions.

A fictional private label change

A fictional business orders a WiFi controller with its own logo. The OEM's evidence pack describes the original model and antenna. Marketing requests a new enclosure, and purchasing accepts an alternative power supply.

The business records its manufacturer role for review and asks the OEM to map the new branded model and changed configuration to the evidence. The responsible reviewer determines whether additional assessment is needed. A new logo alone does not explain the enclosure or supply substitution.

The business does not issue a declaration merely by replacing the OEM's name in an old PDF. It needs a controlled declaration supported by an assessment for the identified product and responsible entity.

Cover lifecycle responsibilities in the contract

Specify how field failures, complaints, vulnerability reports and regulator requests are exchanged. Agree access to firmware source or other maintenance arrangements needed for the support model. Check whether updates can be signed and distributed if the OEM relationship ends.

For Cyber Resilience Act applicability, timing and manufacturer obligations, consult the text of Regulation (EU) 2024/2847 and the Commission's information for manufacturers. The reporting obligations in Article 14 of that Regulation have applied since 11 September 2026, and most other obligations apply from 11 December 2027. An OEM certificate obtained for CE marking does not show that these duties are covered.

Make release authority explicit

Name who can accept evidence, approve a product change, release label artwork and authorise shipment. Record the final configuration and decision. Open gaps should remain visible even if commercial delivery dates become urgent.

For background, see our technical file introduction and the guide to verifying CE documents from an electronics supplier. The example describes no real supplier and makes no claim about a customer's compliance.

FAQ

Frequently asked questions

  • If I sell an OEM device under my own brand, am I the manufacturer?

    For radio equipment, generally yes. Article 2(1)(12) of the Radio Equipment Directive 2014/53/EU defines the manufacturer as a person who manufactures radio equipment or has it designed or manufactured and markets it under his name or trade mark. Article 14 of the same Directive adds that an importer or distributor is considered a manufacturer, with the obligations in Article 10, where it places radio equipment on the market under its own name or trade mark or modifies equipment in a way that may affect compliance. Other legislation, such as RoHS, WEEE or the Cyber Resilience Act, needs its own role assessment.

  • Can the supply contract make the OEM legally responsible instead of me?

    No. A contract can assign practical tasks to the OEM, such as supplying test reports, notifying changes and supporting authority requests, and it can provide for compensation between the parties. It cannot change who the manufacturer is under the product legislation. If you market the device under your own name or trade mark, the manufacturer obligations in Article 10 of the Radio Equipment Directive apply to you, whatever the contract says.

  • Can I reuse the OEM's declaration of conformity with my company name on it?

    Not by editing the document. The EU declaration of conformity is the manufacturer's own declaration for an identified product. Under Article 18 and Annex VI of the Radio Equipment Directive it identifies the equipment and the manufacturer and is issued under the manufacturer's sole responsibility. As the private label manufacturer you need access to the technical documentation and an assessment that covers your branded model and its actual configuration before you sign.

  • How long must I be able to produce the documents?

    For radio equipment, Article 10(4) of the Radio Equipment Directive requires manufacturers to keep the technical documentation and the EU declaration of conformity for 10 years after the radio equipment has been placed on the market. Your contract with the OEM should therefore secure access to the underlying evidence for that whole period, including after the supply relationship ends.

Continue reading

Related guides

Put this into practice

Free tools & references

New to the terminology? Browse the compliance glossary — plain-English, citation-backed definitions of every term above.